{"title":"Spy Camera Detectors","description":"\u003ch4\u003eLens detection or signal detection\u003c\/h4\u003e\n\u003cp\u003eThese find different cameras and it is worth understanding which you need. A lens detector is a ring of red LEDs around a small viewfinder. You hold it up to your eye, look through the viewfinder and sweep the room slowly. A camera lens bounces that red light straight back at you and shows up as a bright point that blinks as you move your head, whether the camera is transmitting, recording to a card or switched off. It is slow, because you are scanning the room by eye, but it finds cameras nothing else will.\u003c\/p\u003e\n\u003cp\u003eA signal detector sweeps for transmissions instead and finds any camera streaming over WiFi or 4G in seconds, much faster, but blind to a camera recording locally. Devices that combine both are the practical choice for most people.\u003c\/p\u003e\n\u003ch4\u003eHow to sweep a room\u003c\/h4\u003e\n\u003cp\u003eWork methodically rather than quickly. Check anything with a view of the bed or bathroom door first: smoke alarms, clocks, chargers, air purifiers, power outlets and ceiling fittings. Turn the lights off for lens detection, reflections are far easier to see in a dark room.\u003c\/p\u003e\n\u003ch4\u003eHow to check a room yourself, before you buy anything\u003c\/h4\u003e\n\u003cp\u003eMost people searching for this want a method, not a product. Start with the lights off and the curtains drawn, then look along the room at eye level and slowly sweep a torch across every surface. A camera lens returns a small, hard, bright point that moves as you move, quite unlike the soft glow of a plastic reflection. Take your time on anything with a hole in it, no matter how small: a lens the width of a pin is normal now.\u003c\/p\u003e\n\u003cp\u003eThen look at the room the way whoever placed it would have. A camera needs a power source, a sight line, and a reason to be there. Work along the mains sockets, the shelf facing the bed, the smoke alarm above the doorway, the clock on the bedside table. Anything pointed at a bed, a desk or a doorway deserves a second look, and anything that has been moved since you arrived deserves a third.\u003c\/p\u003e\n\u003cp\u003eCheck the WiFi list on your phone as well. A camera streaming over WiFi has to appear on a network, and an unfamiliar device name in a place you are staying is worth asking about.\u003c\/p\u003e\n\u003ch4\u003eWhere they actually get put\u003c\/h4\u003e\n\u003cp\u003eIn rentals and hotel rooms the recurring places are smoke alarms, air vents, mains adaptors and USB chargers left plugged in, digital clocks, TV units, power boards, and decorative items on a shelf at bed height. In changing rooms and bathrooms it is more often a hook, a vent, a shampoo bottle or a hole drilled through a wall panel. In workplaces it is chargers, desk clocks and speakers, because nobody questions those.\u003c\/p\u003e\n\u003ch4\u003eWhat a detector finds, and what it does not\u003c\/h4\u003e\n\u003cp\u003eA lens detector works optically. Red LEDs around the eyepiece light the room, you look through the viewfinder, and any lens pointed your way throws the light straight back as a bright red dot. Because it reads the glass rather than a signal, it finds a camera whether it is transmitting, recording to a card, or switched off entirely. Its limit is line of sight: you have to be looking roughly along the axis of the lens for the reflection to come back, which is why a slow sweep from several positions in the room beats one quick pass.\u003c\/p\u003e\n\u003cp\u003eAn RF detector works the opposite way. It finds anything transmitting, including cameras hidden where no lens is visible, but it is blind to a device that is recording locally or is powered down. Between the two, the optical pass catches the recorder and the RF pass catches the streamer, which is why most units here do both.\u003c\/p\u003e\n\u003ch4\u003eHow thorough is thorough\u003c\/h4\u003e\n\u003cp\u003eA careful sweep of a hotel room takes ten to fifteen minutes. A house takes an evening. If the concern is serious rather than precautionary, the honest answer is that a physical search of the likely objects, opening them where you can, finds more than any handheld device on its own.\u003c\/p\u003e\n\u003ch4\u003eRelated\u003c\/h4\u003e\n\u003cp\u003eFor a tracker hidden on a vehicle, see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/gps-tracker-detectors\"\u003eGPS tracker detectors\u003c\/a\u003e. For microphones and recorders, see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/collections\/listening-device-detectors\"\u003elistening device detectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eCommon questions\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eWill it find a camera recording to a card?\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eOnly lens detection will. A signal detector needs the camera to be transmitting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes it work through walls?\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eSignal detection can pick up transmissions from an adjoining room. Lens detection needs line of sight.\u003c\/p\u003e","products":[{"product_id":"all-in-one-bug-detector-rf-spy-cams","title":"All-in-One Bug Detector - 5G RF, GPS Trackers, Spy Cams","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eHidden cameras in your Airbnb. A GPS tracker stuck under your car. A wireless bug transmitting from somewhere in the room. They don't all work the same way — a signal scanner won't find a camera that's off, and it won't find a tracker that's sleeping.\u003c\/p\u003e\n\u003cp\u003eThis detector combines RF signal scanning, magnetic field detection, and an infrared lens finder. Sweeps 5G, 4G, WiFi, and Bluetooth up to 12GHz. Magnetic probe finds GPS trackers even when they're powered off. IR viewfinder reveals camera lenses up to 10 metres away — wired or wireless, on or off.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCatches Modern Bugs and Trackers\u003c\/strong\u003e - RF scanning from 1MHz to 12GHz covers 5G, 4G, WiFi, Bluetooth, and analog signals. Adjustable sensitivity knob lets you dial in on weak or nearby sources.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinds Sleeping GPS Trackers\u003c\/strong\u003e - Magnetic probe detects tracker mounts even when powered off or between pings. Flexible gooseneck reaches under wheel wells and along chassis.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpots Hidden Camera Lenses\u003c\/strong\u003e - IR viewfinder reveals lenses up to 10m away, wired, wireless, or turned off. Works better in darkness; no room lights needed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll-Day Battery\u003c\/strong\u003e - 20 hours per charge. Sweep multiple locations without stopping. Recharges in 4 hours via USB-C.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilent Alert Mode\u003c\/strong\u003e - Vibration alerts instead of beeping so you can sweep discreetly. Switch between buzzer, vibration, or silent.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePinpoint the Source\u003c\/strong\u003e - 20-level LED signal meter guides you closer with every step. Green = weak, red = you're on top of it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhere You'll Use It\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003ch3\u003e\u003cstrong\u003eHotel \u0026amp; Airbnb Check-In\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eHidden cameras in rentals make the news regularly. Before you unpack, sweep the room. RF mode catches WiFi cameras streaming to the owner. Lens finder catches hardwired cameras recording to SD, no signal to detect, but the lens still reflects.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/VIM-BUGDETECT14\/bug-detector-ir-lens-finder.jpg\" alt=\"Bug detector IR lens finder with infrared LEDs for hidden camera detection\" title=\"Look through the red viewfinder — camera lenses reflect back as bright pinpoints\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eVehicle GPS Tracker Sweep\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThink someone's tracking your car? GPS trackers use strong magnets to stick under wheel wells, bumpers, or the chassis. They sleep between location pings — RF scanners miss them. The magnetic probe finds the mount whether the tracker is transmitting or not.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/VIM-BUGDETECT14\/bug-detector-handheld-size.jpg\" alt=\"Handheld bug detector with magnetic probe for vehicle GPS tracker sweeps\" title=\"Portable size lets you sweep your car anywhere — takes 10 minutes\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eHome \u0026amp; Rental Privacy Check\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMoving into a new place? Previous tenants, landlords, or contractors may have left something behind. RF sweep for transmitters. Magnetic probe for hidden trackers. Lens finder for cameras. Three checks, one device.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eRF mode scans for active wireless transmissions, bugs, trackers, cameras sending data. Magnet mode uses the flexible probe to detect magnetic mounts on metal surfaces. Lens finder shines infrared LEDs while you look through the filtered viewfinder, any camera lens reflects back as a bright pinpoint. No app. No WiFi needed. Rechargeable via USB-C. 20 hours per charge.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRF Frequency Range:\u003c\/strong\u003e 1 MHz – 12 GHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection Sensitivity:\u003c\/strong\u003e ≤ 0.03 mV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDynamic Range:\u003c\/strong\u003e \u0026gt; 79 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Lens Detection:\u003c\/strong\u003e Up to 10 metres\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic Probe:\u003c\/strong\u003e Flexible gooseneck antenna\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal Display:\u003c\/strong\u003e 20-level LED indicator\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlert Modes:\u003c\/strong\u003e Buzzer, vibration, silent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 2000mAh Li-Ion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperation Time:\u003c\/strong\u003e Up to 20 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharge Time:\u003c\/strong\u003e 4 hours (USB-C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 115 × 70 × 20 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 200g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLawful Use\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eLegal for personal privacy protection. Use in hotel rooms, Airbnbs, rental properties, your vehicle, or any space where you have a reasonable expectation of privacy. This device detects signals, it does not jam, block, or interfere with any transmission.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × Detector Unit\u003c\/li\u003e\n  \u003cli\u003e1 × RF Antenna\u003c\/li\u003e\n  \u003cli\u003e1 × Magnetic Probe Antenna\u003c\/li\u003e\n  \u003cli\u003e1 × USB-C Charging Cable\u003c\/li\u003e\n  \u003cli\u003e1 × User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003ch3\u003e\u003cstrong\u003e1. Will this find cameras that are turned off or recording to SD card?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. The IR lens finder detects the camera lens itself, not the signal. Turn off the lights, activate CAM mode, and slowly scan the room while looking through the red viewfinder. Any camera lens — on, off, wired, wireless, recording to SD — reflects the infrared light back as a bright pinpoint. Works up to 10 metres away.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e2. Will this find a GPS tracker that's sleeping between pings?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. Most GPS trackers sleep 90% of the time to save battery, they wake up, send location, then go dormant. RF detection misses them during sleep. The magnetic probe detects the neodymium magnet they use to stick to metal. Run the flexible gooseneck along wheel wells, under bumpers, behind the dashboard. If there's a magnet, the probe alerts, doesn't matter if the tracker is transmitting or not.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e3. Won't it just detect my own WiFi router and phone?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIt will. That's normal. The point is to find signals you don't recognise. Turn off your own devices first, or move away from them. In RF mode, walk the room slowly, a hidden bug will show as a signal source that shouldn't be there. The 20-level LED meter helps you triangulate: stronger signal = closer to source.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e4. How long does it take to sweep a hotel room?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA thorough sweep takes 10-15 minutes. Start with RF mode to catch anything transmitting. Then switch to lens finder, lights off, scan walls, ceilings, smoke detectors, clocks, anything facing the bed or bathroom. Check the usual hiding spots: alarm clocks, phone chargers, air purifiers, picture frames, showerheads. The magnetic probe is mainly for vehicles, but worth running along any metal fixtures if you're suspicious.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e5. Does the lens finder work in complete darkness?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. Darkness is better. The IR LEDs provide the light, you don't need room lights on. In fact, a dark room makes hidden lenses easier to spot because the reflection stands out more against a dark background.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e6. Is this legal to use in New Zealand?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. Detection is legal anywhere you have a reasonable expectation of privacy, hotel rooms, Airbnbs, your vehicle, your home. This device only detects signals; it doesn't jam, block, or interfere with anything. You're not breaking any law by checking for hidden cameras in a rental.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eCompare all bug detectors\u003c\/a\u003e - find the right detector for your situation\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eCounter Surveillance Buying Guide\u003c\/a\u003e - Check out the Buying Guide for Guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507505827922,"sku":"VIM-BUGDETECT14","price":362.73,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/all-in-one-rf-detector-spy-listening-bugs-550x550.jpg?v=1784281676"},{"product_id":"bug-detector-rf-signal-bluetooth-wifi-scanner","title":"Bug Detector RF Signal Scanner - 5G \u0026 Bluetooth, WiFi","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eVIM-BUGDETECT12 is a professional RF bug detector designed to locate modern wireless surveillance devices. A dual-antenna setup covers 50 MHz–5.4 GHz for broad sweeps and precise source finding, while magnetic-field sensing helps locate dormant, magnet-mounted trackers. A 20-level LED meter and audio cues guide pinpointing without third-party apps, and the internal 1500 mAh rechargeable battery supports extended operation.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-antenna coverage:\u003c\/strong\u003e Wide-band plus microwave log-periodic antennas improve range and enable directional pinpointing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G cellular coverage:\u003c\/strong\u003e Detects 4G\/5G activity across 50MHz–5.4GHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern protocol detection:\u003c\/strong\u003e Identifies Bluetooth, Wi-Fi, 4G\/5G and DECT activity from cameras, mics and trackers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic tracker finding:\u003c\/strong\u003e Magnetic-field sensing with visual and audible alerts helps uncover dormant vehicle trackers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-level LED tracking:\u003c\/strong\u003e Fine signal-strength steps and audio feedback help speed up source location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging options:\u003c\/strong\u003e Recharge via USB cable or AC adapter (no apps required).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong runtime:\u003c\/strong\u003e 20–45 h battery life supports multi-location sweeps without frequent recharging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhere This Works Best\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSweep meeting rooms, hotel suites, vehicles and temporary workspaces before sensitive discussions. Use the wide-band antenna for room scans, switch to the directional antenna to home in on hotspots, then run magnetic checks around metal structures to find non-transmitting GPS trackers.\u003cbr\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/bug-detector-rf-signal-scanner-black-dual-antenna-in-hand.jpg\" alt=\"Black RF bug detector with two antennas, vertical LED strength bar, power and mode buttons\" title=\"Handheld RF bug detector with dual antennas shown in hand\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorking Current: 25- 35mA\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 50MHz - 5.4GHz\u003c\/li\u003e\n\u003cli\u003eNew Zealandn Frequency Detection: 700, 800, 900, 1800, 2100, 2300, 2600, 3500MHz\u003c\/li\u003e\n\u003cli\u003eDetection Sensitivity: \u0026lt; 0.03 mW\u003c\/li\u003e\n\u003cli\u003eMagnetic Detection Sensitivity: 50mm - 150mm\u003c\/li\u003e\n\u003cli\u003eBattery: Built-in 3.7V1500mAH Lithium Polymer Battery\u003c\/li\u003e\n\u003cli\u003eDimensions (L*W*H): 125 x 52.5 x 21.5mm\u003c\/li\u003e\n\u003cli\u003eRuntime: 20–45 h\u003c\/li\u003e\n\u003cli\u003eWeight: 385 g\u003c\/li\u003e\n\u003cli\u003eWireless Camera Detection Area (10 mW): 25 m²\u003c\/li\u003e\n\u003cli\u003eWireless Camera Detection Area @ 1.2 GHz (10 mW): 36 m²\u003c\/li\u003e\n\u003cli\u003eCellular Signal Detection Area: 5–25 m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e 1 x RF Detector \u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003e 2 x Antennas \u003c\/li\u003e\n\u003cli\u003e 1 x USB Cables \u003c\/li\u003e\n\u003cli\u003e 1 x Adapter \u003c\/li\u003e\n\u003cli\u003e 1 x User Manual \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan it find devices that aren’t actively transmitting?\u003c\/strong\u003e\u003cbr\u003eYes. The magnetic-field sensor helps locate magnet-mounted trackers even when they are not radiating RF.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I use the two antennas effectively?\u003c\/strong\u003e\u003cbr\u003eStart with the wide-band antenna for general sweeps, then switch to the directional antenna to narrow down and pinpoint the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require apps or internet?\u003c\/strong\u003e\u003cbr\u003eNo. Operation is fully local with the 20-level LED meter and audio feedback for guidance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat signals can it detect?\u003c\/strong\u003e\u003cbr\u003eIt covers Bluetooth, Wi-Fi, 4G\/5G and DECT activity across 50 MHz–5.4 GHz within its sensitivity limits.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eBrowse bug detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eA Buying Guide on Counter-surveillance tools\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/gps-tracker-detectors\"\u003eGPS tracker detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507513659474,"sku":"VIM-BUGDETECT12","price":450.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/Main_20Product_20professional-bug-sweeper-counter-surveillance-rf-detector-main-550x550.jpg?v=1784281719"},{"product_id":"bug-detector-wireless-signal-finder-compact-hand-held","title":"Bug Detector Wireless Signal Finder Compact Hand-Held","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n  \u003cp\u003eThe VIM-BUGDETECT11 is a handheld RF bug detector designed to locate wireless surveillance signals with on-device guidance. It displays live frequency and signal strength on a clear LCD, supports adjustable sensitivity with a lock function for closer inspection, and uses rechargeable AAA cells for field use. Antenna-based scanning helps track active sources across common New Zealandn 4G\/5G bands as well as Wi-Fi and Bluetooth (see Technical Specifications). Four alert modes—beep, vibration, silent, or combined—let you sweep discreetly in sensitive environments.\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWideband RF detection:\u003c\/strong\u003e Scans for contemporary wireless threats on 4G\/5G, Wi-Fi, and Bluetooth so you can identify cameras, audio bugs, and trackers using modern signals.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReadable LCD feedback:\u003c\/strong\u003e On-screen frequency and signal strength make it easier to home in on sources without guesswork.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision control:\u003c\/strong\u003e Adjustable sensitivity with a frequency lock aids fine localisation during close-in sweeps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexible alerts:\u003c\/strong\u003e Choose beep, vibration, silent, or combined alerts to suit quiet rooms or noisy sites.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePortable power:\u003c\/strong\u003e Runs on rechargeable AAA batteries and supports power-bank charging for extended sessions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePractical detection range:\u003c\/strong\u003e 5–6 m (Low) up to 20 m (High), depending on signal power and environment.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eTypical Use Scenarios\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003eCarry the detector for quick checks in meeting rooms, hotel stays, rentals, vehicles, or shared offices. Use the LCD to verify suspect activity, step down sensitivity to narrow the source, and switch to vibration or silent alerts for discreet operation.\u003cbr\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/bug-detector-wireless-signal-finder-triple-antenna-side-view.jpg\" alt=\"Handheld wireless bug detector in black with three antennas, LCD screen, headphone jack, side controls and USB port\" title=\"Handheld bug detector with LCD and three antennas, side view\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eNew Zealandn Frequency Detection: 700, 800, 900, 1800, 2100, 2300, 2600, 3500Mhz\u003c\/li\u003e\n    \u003cli\u003eUSB Power: 5V 1A USB Charger\u003c\/li\u003e\n    \u003cli\u003eBattery: AAA UM4-4 Rechargeable Battery\u003c\/li\u003e\n    \u003cli\u003eDimensions (L*W*H): 116 x 70 x 33mm\u003c\/li\u003e\n    \u003cli\u003eWeight: 215g\u003c\/li\u003e\n    \u003cli\u003eOperating Modes: Low band (700–900 MHz) \/ High band (1800–3600 MHz) switchable\u003c\/li\u003e\n    \u003cli\u003eModel \/ SKU: VIM-BUGDETECT11 (SH-055UAE)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003ePackaging Contents\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Signal Bug Detector\u003c\/li\u003e\n    \u003cli\u003e3 x Antennas\u003c\/li\u003e\n    \u003cli\u003e1 x Wired Earphones\u003c\/li\u003e\n    \u003cli\u003e1 x 4 Batteries\u003c\/li\u003e\n    \u003cli\u003e1 x Mini USB Cable\u003c\/li\u003e\n    \u003cli\u003e1 x User manual\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eDoes it show the frequency it’s detecting?\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eYes. The LCD displays the detected frequency and signal strength to help you identify sources.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWhich wireless technologies can it detect?\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eIt scans for 4G\/5G cellular, Wi-Fi, and Bluetooth signals within the bands listed in the specifications.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWhat alert options are available during a sweep?\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eYou can select beep, vibration, silent, or combined beep + vibration alerts.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eHow do I narrow down the exact location of a device?\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eReduce sensitivity as the signal increases and use the frequency lock to focus on a specific emission while moving the antenna.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWhat power options does it use?\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp\u003eIt runs on rechargeable AAA batteries and supports 5V\/1A USB charging; a power bank can be used in the field.\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\n  \u003chr\u003e\n  \u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eExplore all bug detectors\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eHidden camera detector range\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eA Buying Guide to counter-surveillance\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507533942866,"sku":"VIM-BUGDETECT11","price":900.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/signal-strength-bug-detector-spy-mobile-phone-recording-4g-3g-gsm-professional-high-end-550x550.jpg?v=1784281794"},{"product_id":"portable-spy-camera-detector-lens-view-finder","title":"Dark Room Camera Detector | Find Cameras Day \u0026 Night","description":"\u003cp\u003eStandard lens finders work when you can see the room. Night vision cameras work when you can't. A covert camera using 940nm infrared illumination records clear footage in complete darkness without producing any visible light – and a standard lens sweep conducted with the lights on will never reveal it. This detector addresses both conditions with dedicated modes: Mode A identifies active infrared sources in darkness, Mode B locates lens reflections in ambient light.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDedicated IR Source Detection\u003c\/strong\u003e – Mode A identifies cameras emitting 940nm infrared light for night recording. These sources are completely invisible to the human eye but appear clearly through the detector's viewfinder in a darkened room.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptical Lens Detection\u003c\/strong\u003e – Mode B reflects infrared off camera lenses in normal lighting conditions. Detects all lens types regardless of power state – active, dormant, wired, or battery-powered.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-Hour Operational Runtime\u003c\/strong\u003e – 600mAh rechargeable battery supports multi-room sweeps without interruption. Covers extended facility checks on a single charge. Recharges in 2 hours via Micro USB.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCalibration Lens Included\u003c\/strong\u003e – test lens replicates a hidden camera's optical signature for pre-deployment training. Operators develop consistent detection technique before field use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-Profile Form Factor\u003c\/strong\u003e – 137 × 56 × 17mm. Slim enough for discreet carry during site assessments. No visible bulk that signals a sweep is in progress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eAfter-Hours Facility Sweeps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eOffices empty at night. Security cameras are expected – covert cameras are not. A 940nm night vision device planted in an executive office or server room records everything after hours without any visible indicator.\u003c\/p\u003e\n\u003cp\u003eConduct Mode A sweeps in darkness during non-business hours. Any IR source that isn't part of the authorised security system is a finding. Follow with a Mode B daylight sweep during working hours to catch non-IR cameras.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2023\/VIM-CAMFINDER6\/home-indoor-view-lens-finder-red.jpg\" alt=\"Dark room camera detector showing Mode A and Mode B optical viewfinders\" title=\"Mode A catches IR cameras in darkness, Mode B confirms standard lenses under light\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eAccommodation Security Assessments\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eExecutive accommodation, conference venues, and temporary office spaces all present uncontrolled environments. Night vision cameras are the primary concern in sleeping areas – they record without light and without detection by standard counter-surveillance methods.\u003c\/p\u003e\n\u003cp\u003eMode A addresses the sleeping-area threat directly. Mode B covers common areas and workspaces. Two sweeps, two lighting conditions, complete optical coverage of the venue.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2023\/VIM-CAMFINDER6\/professional-hand-held-bug-detector-view-finder-lens-eye.jpg\" alt=\"Camera detector with infrared LEDs active during facility lens sweep\" title=\"LED beam reflects off hidden lenses – visible through the red viewfinder as a bright dot\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e – Charge fully via Micro USB. Familiarise with viewfinder response using the included test lens.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDark Sweep (Mode A)\u003c\/strong\u003e – Extinguish all lights. Scan through the viewfinder. Active infrared sources from night vision cameras appear as visible points that surrounding electronics do not produce.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaylight Sweep (Mode B)\u003c\/strong\u003e – Restore lighting. Infrared beam reflects off camera lenses – each confirmed lens appears as a bright dot in the viewfinder against a clean background.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection Method:\u003c\/strong\u003e Dual-mode infrared optical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode A:\u003c\/strong\u003e Night vision IR source detection (940nm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMode B:\u003c\/strong\u003e Infrared lens reflection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 600mAh rechargeable (10hr continuous)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Micro USB, 2-hour full charge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eViewfinder:\u003c\/strong\u003e 36mm diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 137 × 56 × 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLawful Use\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis detector passively receives infrared light and reflects infrared off surfaces. It does not intercept, record, block, or jam any signals or communications. Legal for counter-surveillance and privacy protection across all New Zealandn states and territories.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× Lens View Finder\u003c\/li\u003e\n  \u003cli\u003e1× Micro USB Charging Cable\u003c\/li\u003e\n  \u003cli\u003e1× Test Lens\u003c\/li\u003e\n  \u003cli\u003e1× User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003ch3\u003e\u003cstrong\u003e1. Why does this need two separate modes?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMode A detects infrared light being emitted by night vision cameras – this only works in darkness when those IR LEDs are active. Mode B detects lens reflections using the detector's own infrared beam – this works in any lighting. Different detection physics, different lighting requirements, both necessary for comprehensive coverage.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e2. Will Mode A find cameras that don't use infrared?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNo. Mode A specifically detects active IR emission. Cameras recording with ambient light only (no IR LEDs) require Mode B for detection. Running both modes in their correct lighting conditions ensures full coverage.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e3. Does this replace RF signal detection?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNo. This is purely optical – it finds cameras by their physical lens or IR emission, not by wireless transmission. For a complete counter-surveillance sweep, pair it with an RF detector to cover wireless transmitters, cellular bugs, and GPS trackers.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e4. How does this compare to the WEGA-i?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe WEGA-i offers superior lens detection with IR-filtering glass and 10m range, eliminating false reflections entirely. This detector adds dedicated night vision camera detection (Mode A) that the WEGA-i lacks. For environments where night vision cameras are a primary concern, this is the specialist tool.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e5. Is 10 hours enough for multi-room facility sweeps?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. Each room requires two passes (dark + daylight), approximately 10–15 minutes total. 10 hours covers 40+ rooms per charge, sufficient for most facility assessments.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eBrowse all camera detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eHow to Decide on a Counter Surveillance Tools\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507538104402,"sku":"VIM-CAMFINDER6","price":180.91,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/wireless-view-finder-lens-red-eye-portable-hand-held-550x550_af1f7f81-17cf-4a4f-b427-d29fc7dabaad.jpg?v=1784281808"},{"product_id":"wireless-pocket-lens-view-finder-bug-detector","title":"Wireless Spy Camera Detector | RF Scan \u0026 Lens Sweep","description":"\u003cp\u003eSignal-based detection alone misses every camera that isn't actively transmitting – wired units, battery recorders, devices switched off before you arrive. Optical-only detection misses every camera concealed behind a cover or recessed into a surface. This detector runs both methods in sequence: RF antenna locates wireless transmitters by signal strength, then the infrared lens finder confirms the camera visually.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Method Sweep\u003c\/strong\u003e – RF antenna identifies wireless signals from WiFi, 4G, and GSM transmitters. Infrared lens finder detects physical camera optics. Two detection methods, one device.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal Strength Guidance\u003c\/strong\u003e – LED indicator rises as you approach a transmitting device, directing you to the exact source without guessing which object in the room is broadcasting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e940nm Infrared Mode\u003c\/strong\u003e – detects night vision cameras operating with invisible IR LEDs. These cameras are designed to record in darkness and are invisible to the human eye.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-Hour Runtime\u003c\/strong\u003e – 600mAh rechargeable battery covers extended multi-room sweeps. Full recharge in 2 hours via Micro USB.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVerification Lens Included\u003c\/strong\u003e – test lens replicates a hidden camera's optical signature, allowing operators to calibrate their sweep technique before deployment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact Field Profile\u003c\/strong\u003e – 138 × 53 × 15mm. Discreet enough for pre-meeting checks or travel without drawing attention to the sweep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003ePre-Meeting Room Clearance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eConference rooms used by multiple departments, clients, and external visitors present a rotating access problem. A device planted during one meeting records every meeting that follows.\u003c\/p\u003e\n\u003cp\u003eRun the RF scan to flag active transmitters, then sweep surfaces with the lens finder. The dual method catches both wireless cameras streaming to an external receiver and passive devices storing footage locally.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2023\/VIM-CAMFINDER4\/lens-reflection-detection-spy-camera-detector-hidden-home-indoor-discrete.jpg\" alt=\"Wireless spy camera detector scanning for hidden transmitters in room\" title=\"RF antenna detects WiFi and 4G signals before switching to optical lens confirmation\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eSensitive Facility Inspections\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eOffices handling legal, financial, or IP-sensitive work are surveillance targets. A single compromised room leaks months of privileged information before anyone notices.\u003c\/p\u003e\n\u003cp\u003eIncorporate this detector into routine facility checks. The 10-hour battery handles floor-by-floor sweeps without recharging, and the compact size keeps the inspection discreet.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2023\/VIM-CAMFINDER4\/wireless-infrared-night-vision-view-finder-red-portable.jpg\" alt=\"Spy camera detector exposing infrared LEDs hidden inside alarm clock\" title=\"940nm viewfinder reveals night vision cameras disguised as everyday objects\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e – Charge fully via Micro USB. Disable known wireless devices in the room or note their positions to isolate unknown signals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRF Sweep\u003c\/strong\u003e – Activate signal detection mode. Walk the perimeter, then the interior. LED strength indicator identifies transmitting devices by proximity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptical Confirm\u003c\/strong\u003e – Switch to infrared lens finder. Look through the viewfinder and sweep all surfaces – camera lenses appear as a distinct bright dot against the background.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection Methods:\u003c\/strong\u003e RF signal detection + infrared optical lens finder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRF Detection:\u003c\/strong\u003e WiFi, 4G, GSM wireless signals\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptical Mode:\u003c\/strong\u003e Infrared LED lens reflection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNight Detection:\u003c\/strong\u003e 940nm infrared\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 600mAh rechargeable (10hr continuous)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Micro USB, 2-hour full charge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eViewfinder:\u003c\/strong\u003e 85 × 37mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 138 × 53 × 15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLawful Use\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis detector passively receives wireless signals and reflects infrared light off surfaces. It does not intercept, record, block, or jam any communications. Legal for counter-surveillance and privacy protection across all New Zealandn states and territories.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× RF Bug Detector\u003c\/li\u003e\n  \u003cli\u003e1× Micro USB Charging Cable\u003c\/li\u003e\n  \u003cli\u003e1× Test Lens\u003c\/li\u003e\n  \u003cli\u003e1× User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003ch3\u003e\u003cstrong\u003e1. How does this compare to a dedicated RF detector?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA dedicated RF detector typically covers a wider frequency range and offers more granular signal analysis. This device trades that depth for dual-method capability – you get RF detection plus optical lens finding in one unit, making it practical for rapid sweeps where time matters more than signal forensics.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e2. Can I use both modes simultaneously?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNo – modes are sequential. Run the RF sweep first to identify transmitting devices, then switch to the lens finder to confirm cameras and catch non-transmitting devices the RF scan missed.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e3. Will the 940nm mode find all night vision cameras?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIt detects cameras using 940nm IR LEDs for night recording. Cameras using 850nm LEDs (which produce a faint visible red glow) are also detectable. Cameras without IR illumination won't be visible in this mode but will still be caught by the standard lens finder.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e4. What does the test lens do?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIt replicates the optical reflection of a hidden camera lens. Place it in a room and practise locating it through the viewfinder to develop consistent sweep technique before field deployment.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e5. Is 10 hours sufficient for multi-room sweeps?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. A thorough single-room sweep takes 10–15 minutes. 10 hours covers 40+ rooms on a single charge, more than enough for most facility inspections.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eView the full camera detector range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/all-in-one-bug-detector-rf-spy-cams\" target=\"_blank\"\u003eNeed GPS tracker detection too? The full counter-surveillance sweep tool covers RF, GPS, and lenses\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eHow to choose the right spy camera detector with the Counter Surveillance Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507538137170,"sku":"VIM-CAMFINDER4","price":208.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/spy-camera-detector-gps-tracker-finder-listening-device-GSM-bug-550x550.jpg?v=1784281809"},{"product_id":"professional-iprotect-1217-wireless-signal-detector","title":"iProtect 1217 Wireless Signal Detector","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n  \u003cp\u003eThe iProtect 1217 is a multi-band RF detector that locates wireless spy devices and hidden cameras across at least 26 detection bands. It supports four operating modes (All Bands, Group, Band, Tracker), uses dual SMA antenna inputs with a high-band directional antenna, and provides visual\/audio alerts with 43 threshold levels. Power comes from a built-in rechargeable battery (up to 5 hours) with USB Type-C recharging for field use.\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e26-band coverage:\u003c\/strong\u003e Detects mobile and wireless signals including Wi-Fi 2.4\/5 GHz, Bluetooth, GSM, 4G\/LTE, and 5G.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFour operating modes:\u003c\/strong\u003e All Bands, Group of selected bands, single Band analysis, and GPS Tracker detection for targeted sweeps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDual-antenna flexibility:\u003c\/strong\u003e Two SMA inputs and a high-band directional antenna help locate transmitters above 2400 MHz.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInterference control:\u003c\/strong\u003e 43 threshold levels with visual and audio alarms to manage noisy RF environments.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSelective multi-band identification:\u003c\/strong\u003e Indicates which signal types are present to speed investigation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePortable power:\u003c\/strong\u003e Built-in rechargeable battery supports up to 5 hours; USB Type-C recharging keeps the unit ready.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eWhere This Helps Most\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003eUse in homes, offices, hotel rooms, and meeting spaces to scan furniture, fixtures, and typical hiding spots for covert transmitters. The mode options let you cover broad ranges quickly, narrow to suspect bands, or focus on GPS trackers.\u003cbr\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/iprotect-1217-rf-detector-handheld-black-screen-view.jpg\" alt=\"Two hands hold the iProtect 1217 RF detector; large color display shows spectrum bars, left fold-out micro-pointer antenna, right rod antenna, and front joystick controls\" title=\"Hands holding iProtect 1217 with fold-out micro-pointer antenna\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eNumber of Bands: 26\u003c\/li\u003e\n    \u003cli\u003eAntenna Inputs: Input 1: SMA, 2400 - 6000MHz | Input 2: SMA, 600 - 2400MHz\u003c\/li\u003e\n    \u003cli\u003eAverage Sensitivity: -60dBm\u003c\/li\u003e\n    \u003cli\u003eOperation Modes: All Bands (Detection on all Bands), Group (Detection on the Selected Group of Bands), Band (Analysis of a Separate Band), Tracker (Detection of GPS Trackers)\u003c\/li\u003e\n    \u003cli\u003eAlarm Function: Visual or Audio\u003c\/li\u003e\n    \u003cli\u003eNumber of Alarm Threshold Levels: 43\u003c\/li\u003e\n    \u003cli\u003eSound Signals: Alarm, Depression of Button\u003c\/li\u003e\n    \u003cli\u003ePower Supply Source: USB 5V\u003c\/li\u003e\n    \u003cli\u003ePower: Built-in Rechargeable Battery 6800mAH 3.7V\u003c\/li\u003e\n    \u003cli\u003eBattery Operational Resource: Up to 5 Hours\u003c\/li\u003e\n    \u003cli\u003eWeight: 750g (Without Antenna), 1500g (Packed)\u003c\/li\u003e\n    \u003cli\u003eDimensions 208x86x41mm\u003c\/li\u003e\n    \u003cli\u003eOperating Temperature Range -5°C - 50°C\u003c\/li\u003e\n    \u003cli\u003eFrequency allocation: Adjustable by country\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003ePackaging Contents\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x iProtect 1217 Device\u003c\/li\u003e\n    \u003cli\u003e1 x High-Band Antenna Micro-Pointer\u003c\/li\u003e\n    \u003cli\u003e1 x Low-Band Rod Antenna\u003c\/li\u003e\n    \u003cli\u003e1 x USB Type-C Charging Cable\u003c\/li\u003e\n    \u003cli\u003e1 x Power Adapter\u003c\/li\u003e\n    \u003cli\u003e1 x Transportation Case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eWhich signals can it detect?\u003c\/strong\u003e\u003cbr\u003eIt covers 26 mobile and wireless bands, including Wi-Fi 2.4\/5 GHz, Bluetooth, GSM, 4G\/LTE, 5G, and signals used by GPS trackers.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eHow do the operating modes differ?\u003c\/strong\u003e\u003cbr\u003eAll Bands scans everything, Group narrows to selected bands, Band analyzes a single band, and Tracker focuses on GPS tracking signals.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eHow do I manage interference?\u003c\/strong\u003e\u003cbr\u003eUse the 43 threshold levels and visual\/audio alarms to set a comfortable trigger point in busy RF environments.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWhat is the typical runtime?\u003c\/strong\u003e\u003cbr\u003eThe built-in battery supports up to 5 hours per charge; recharge via USB Type-C.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eCan it help locate a transmitter’s position?\u003c\/strong\u003e\u003cbr\u003eYes. The high-band directional antenna assists in homing in on sources above 2400 MHz.\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\n  \u003chr\u003e\n  \u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eExplore all bug detectors\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eHidden camera detector range\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eCounter-surveillance guide\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"VIMEL","offers":[{"title":"Default Title","offer_id":42507554193490,"sku":"iProtect-1217","price":4454.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/vimel-iprotect1217-sim-card-4g-3g-security-camera-wifi-detection-wireless-hand-held-550x550_4f0e44c7-a563-4707-bc67-842925c9a87b.jpg?v=1784281893"},{"product_id":"wireless-spy-camera-detector-view-finder","title":"RF Spy Camera Detector | Voice \u0026 Camera Signal Scan","description":"\u003cp\u003eCamera detectors find cameras. But a voice recorder sitting in a bag or taped under a desk produces no video signal – it captures audio only and stores it locally. Standard camera sweeps miss it completely. This detector includes a dedicated voice recorder sensor alongside RF signal detection and infrared lens finding, covering the threat that single-purpose devices leave exposed.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoice Recorder Sensor\u003c\/strong\u003e – dedicated detection mode identifies active voice recording devices that camera-only detectors and RF-only sweeps cannot find. Covers the audio threat gap in a standard sweep.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLCD Signal Tracking\u003c\/strong\u003e – built-in screen displays RF signal strength numerically as you move through a space. Eliminates ambiguity from LED-only indicators and provides a clear, documentable reading.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTriple Detection Method\u003c\/strong\u003e – RF signal scanning, voice recorder sensing, and infrared optical lens finding in one device. Three threat categories addressed without switching tools.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e940nm IR Lens Mode\u003c\/strong\u003e – identifies cameras operating with invisible infrared illumination for dark-environment recording. These devices produce no visible light.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e150g Field Weight\u003c\/strong\u003e – 103 × 62 × 40mm with sliding compact mechanism. Discreet enough for pre-meeting checks without signalling that a sweep is underway.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlways Ready\u003c\/strong\u003e – 3-month standby means the device holds charge between deployments. 2–2.5 hours active runtime per session, Micro USB recharge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eExecutive Meeting Preparation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePhones aren't the only recording threat in a meeting room. A voice recorder concealed in a bag, jacket, or piece of furniture captures every word without transmitting a detectable wireless signal.\u003c\/p\u003e\n\u003cp\u003eRun the voice recorder sensor before attendees arrive. Follow with an RF sweep to flag any wireless transmitters, then confirm with the lens finder. Three passes, three threat types covered.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2022\/VIM-DETECT9\/vimel-bug-detector-wireless-device-audio-recorders-hidden-camera-lens-detection-room-house-home.jpg\" alt=\"Compact spy camera detector held in hand showing LCD screen and dual scan modes\" title=\"Small enough for a briefcase – sweep a boardroom before the meeting starts\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eLegal \u0026amp; Financial Office Sweeps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePrivileged client conversations, case strategy, financial disclosures – any recording of these creates liability. A planted voice recorder is cheaper and harder to find than a hidden camera.\u003c\/p\u003e\n\u003cp\u003eThe LCD screen provides a clear signal reading that can be noted as part of a sweep log. Voice recorder sensor adds the detection layer that standard camera sweeps lack.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDeploy\u003c\/strong\u003e – Micro USB charge, 3–4 hours to full. LCD activates on power-on. No network dependency.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetect\u003c\/strong\u003e – RF mode scans for wireless transmitters with signal strength displayed on the LCD. Voice recorder sensor runs in parallel, flagging audio recording devices separately.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVerify\u003c\/strong\u003e – Switch to infrared lens finder. Look through the viewfinder to visually confirm camera lenses. Cross-reference against RF findings to classify each detected device.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2022\/VIM-DETECT9\/vimel-best-quality-bug-detector-recording-device-high-end-voice-wireless-4g-camera-detection.JPG\" alt=\"RF spy camera detector controls showing LCD display, lens mode switch, and signal scan buttons\" title=\"LCD displays live signal readings while separate lens mode confirms optical threats\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003col\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection Methods:\u003c\/strong\u003e RF signal detection + voice recorder sensor + infrared lens finder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e Built-in LCD (real-time signal strength)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNight Detection:\u003c\/strong\u003e 940nm infrared\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 450mAh rechargeable (2–2.5hr active, 3-month standby)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Micro USB, 3–4 hour full charge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 103 × 62 × 40mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 150g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLawful Use\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis detector passively receives wireless signals, detects recording device emissions, and reflects infrared light. It does not intercept, record, block, or jam any communications. Legal for counter-surveillance and privacy protection across all New Zealandn states and territories.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× Spy Camera Detector\u003c\/li\u003e\n  \u003cli\u003e1× Micro USB Charging Cable\u003c\/li\u003e\n  \u003cli\u003e1× User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003ch3\u003e\u003cstrong\u003e1. What voice recorders does the sensor detect?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe sensor identifies active recording devices that emit a detectable electronic signature. Passive analogue recorders with no electronic emission may not be detected, but these are increasingly rare in modern surveillance.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e2. Can the LCD reading be used in sweep documentation?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. The numerical signal strength display provides a recordable reading for each location tested. Note the reading and position during your sweep for a basic log of findings.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e3. How does this compare to dedicated TSCM equipment?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is a field-level sweep tool, not a full TSCM platform. It covers three common threat categories (wireless cameras, voice recorders, and hidden lenses) in a portable format. Dedicated TSCM equipment offers wider frequency ranges, non-linear junction detection, and spectrum analysis for higher-security environments.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e4. Is 2.5 hours active runtime sufficient?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFor targeted room sweeps, yes. A conference room takes 10–15 minutes. An executive floor of 6–8 offices takes approximately one hour. Recharge via Micro USB between larger sweep sessions.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e5. Does the voice recorder sensor replace an RF bug detector?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNo – it complements one. The voice recorder sensor targets audio recording devices specifically. An RF bug detector covers a broader frequency range for GPS trackers, wireless transmitters, and cellular bugs. For comprehensive counter-surveillance, use both.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eSee all Camera Detectors Side by Side\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eWhich Counter-Surveillance tools do you actually need – Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507557404754,"sku":"VIM-CAMFINDER3","price":171.82,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/vimel-security-privacy-bug-detector-spy-hidden-camera-detection-view-finder-550x550_d9207899-4c06-45ed-b007-98f066a140b7.jpg?v=1784281913"},{"product_id":"professional-spy-hidden-camera-detector-view-finder-led","title":"Personal Spy Camera Detector | LED Proximity Lens Finder","description":"\u003cp\u003eCounter-surveillance kits accumulate features. RF scanning, signal analysis, night vision modes – each adds complexity and another battery drain. For lens-only sweeps where the task is simply confirming whether a room contains camera lenses, none of that is necessary. This detector runs 25 hours continuous on a single charge, detects lenses by LED reflection through a red viewfinder, and has no modes to misconfigure. One function, executed reliably across dozens of rooms.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e25-Hour Operational Runtime\u003c\/strong\u003e – 950mAh battery delivers the longest continuous sweep time in the range. Complete multi-room facility checks, multi-day deployments, or extended property assessments without recharging mid-task.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6-Month Standby Readiness\u003c\/strong\u003e – maintains charge in storage for months between deployments. No pre-charge required before rapid-response callouts or unscheduled travel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eZero Configuration Required\u003c\/strong\u003e – single detection mode with no settings, thresholds, or frequency selection. Eliminates operator error from mode selection and reduces training time to minutes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4-Bar Proximity Indicator\u003c\/strong\u003e – LED bar rises from 1 to 4 as the viewfinder approaches a lens. Provides graduated confirmation rather than binary detection, allowing precise location without disassembling fixtures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePortable and Always Ready\u003c\/strong\u003e – Fits in a jacket pocket alongside other sweep tools without adding meaningful weight to a field kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eMulti-Room Facility Inspections\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eLarge properties – corporate offices, warehouses, residential complexes – require room-by-room optical sweeps that can take hours. Most lens finders run out of charge before the sweep is complete, forcing mid-task recharging that breaks operational flow.\u003c\/p\u003e\n\u003cp\u003e25 hours covers 100+ rooms at 10–15 minutes per room. One charge, one sweep, complete coverage. The 4-bar indicator confirms or clears each surface without the operator needing to interpret signal data.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2020\/VIM-DETECT7\/vimel-hidden-camera-spy-identifier-finder-lens-reflection-easy-to-use-portable-compact-light-weight-led-bright-red-indication-rechargeable-battery-new%20zealand-best-quality-excellent-device.jpg\" alt=\"Spy camera detector showing red LED viewfinder and green proximity bar indicator\" title=\"4-bar indicator climbs as the detector approaches a hidden camera lens\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eRapid Deployment – Unplanned Sweeps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNot every sweep is scheduled. A client reports a concern, a venue changes, a room needs checking before a meeting in 30 minutes. Equipment that needs overnight charging first is equipment that isn't ready.\u003c\/p\u003e\n\u003cp\u003e6-month standby means this detector is operational when pulled from storage. Power on, sweep, confirm or clear. No app, no WiFi, no phone pairing – nothing between the operator and the result.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eHow It Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDeploy\u003c\/strong\u003e – Power on. No pairing, no calibration, no app connection. Operational in seconds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScan\u003c\/strong\u003e – Move viewfinder across all surfaces at close range. Camera lenses reflect the LED beam as a bright dot visible through the red filter. Non-lens surfaces produce no reflection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfirm\u003c\/strong\u003e – 4-bar LED indicator increases as you close distance on a lens. Peak reading at point-blank range confirms camera location for documentation or removal.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2020\/VIM-DETECT7\/vimel-easy-to-use-spy-covert-discrete-hidden-camera-finder-locater-lens-reflection-bright-red-led-indication-indicator-portable-light-weight-visual-operation-long-stand-by-time-view-finder-frequency.jpg\" alt=\"Personal spy camera detector diagram showing viewfinder, LED array, and proximity indicator\" title=\"One button operation – LED beam projects through viewfinder to catch lens reflections\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\u003col\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection Method:\u003c\/strong\u003e LED optical lens reflection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eViewfinder:\u003c\/strong\u003e Red filter with LED reflection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndicator:\u003c\/strong\u003e 1–4 LED frequency bars\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 950mAh rechargeable (25hr continuous, 6-month standby)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Micro USB, 4–5 hour full charge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 120 × 60 × 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 120g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLawful Use\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis detector passively reflects light off surfaces to identify camera lenses. It does not intercept, record, block, or jam any signals or communications. Legal for counter-surveillance and privacy protection across all New Zealandn states and territories.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× Spy Camera Detector\u003c\/li\u003e\n  \u003cli\u003e1× Micro USB Charging Cable\u003c\/li\u003e\n  \u003cli\u003e1× User Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003ch3\u003e\u003cstrong\u003e1. Where does this fit in a counter-surveillance toolkit?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIt's the dedicated optical sweep tool. RF detectors find wireless transmitters, spectrum analysers find cellular bugs, and this finds physical camera lenses regardless of whether they're transmitting, dormant, or wired. It complements signal-based tools – it doesn't replace them.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e2. Why would I choose this over a multi-mode detector?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eRuntime and simplicity. Multi-mode detectors split battery across RF scanning, night vision detection, and lens finding – typically running 2–10 hours. This dedicates all 950mAh to one function: 25 hours of lens detection. For operators who already carry separate RF and signal tools, adding another multi-mode device is redundant. This fills the optical gap without duplicating what you already have.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e3. Will it detect cameras behind cover materials?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eOnly if the lens is exposed. The detection relies on light reflecting off the glass lens surface. Cameras hidden behind opaque covers, fabric, or non-transparent materials require RF detection or physical inspection to locate.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e4. Can multiple operators share one unit across shifts?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. 25 hours covers multiple operator shifts on a single charge. No user profiles, no accounts, no app pairing – any operator picks it up and it works identically.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003e5. How does the 4-bar indicator compare to signal strength meters on RF detectors?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eSimilar concept, different physics. RF signal strength measures electromagnetic intensity at distance. The 4-bar LED indicator measures optical reflection intensity as the viewfinder approaches a lens. Both guide you toward the source – the LED indicator specifically confirms you're looking at a glass lens, not an electronic emission.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eCompare all Camera Detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eWhat belongs in a Counter-Surveillance kit – Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507593351250,"sku":"VIM-CAMFINDER","price":135.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/vimel-finder-locater-lens-reflection-bright-red-led-easy-to-use-spy-covert-discrete-hidden-camera-indication-indicator-portable-light-weight-visual-operation-long-stand-by-time-550x55.jpg?v=1784282042"},{"product_id":"spy-camera-detector-audio-jammer-lens-finder","title":"Professional Spy Camera Detector Audio Jammer Lens Finder","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eThe VIM-BUGDETECT09 professional bugs, wired and wireless spy cameras finder is a handheld counter-surveillance detector that combines RF scanning, lens finding and audio jamming to locate hidden devices. It is designed to detect GSM, 4G and 5G bugs, wireless cameras and other spy transmitters while also providing an anti-recording noise generator and voice recorder jammer function to protect sensitive conversations.\u003c\/p\u003e\n\u003cp\u003eA wide RF detecting range from 50 MHz to 6.0 GHz, multiple warning modes and SMART status indication help you identify suspicious signals quickly. The detector supports live listening to wireless microphones, offers adjustable sensitivity for tracing signal sources and remains portable enough for use in corporate boardrooms, government agencies, police interrogation rooms and confidential meetings.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti band bug and camera detection:\u003c\/strong\u003e Detects GSM, 4G and 5G bugs, wireless RF bugs and various spy devices, including hidden spy cameras.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens finder for wired cameras:\u003c\/strong\u003e Lens finder mode is designed to uncover wired spy cameras that may not emit wireless signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise generator and voice recorder jammer:\u003c\/strong\u003e Built-in noise generator and voice recorder jammer function provide anti-recording protection during sensitive discussions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart status indicators:\u003c\/strong\u003e SMART indication system shows power, signal types and warning modes with LED, beep, vibration, acoustic and earphone alerts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable sensitivity and live listening:\u003c\/strong\u003e Sensitivity tuner and FM acoustic mode help home in on signal sources and monitor audio from wireless RF microphones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhere This Detector Is Used\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis detector suits business conferences, confidential meetings, important interviews, corporate boardrooms, government agencies and police interrogation rooms where you need to scan for wireless bugs, hidden cameras and live listening devices before or during private conversations.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/securitylab-rf-bug-detector-audio-jammer-lens-finder-front.jpg\" alt=\"Black handheld RF bug detector on a white background with an antenna extended and a slide out lens finder module featuring a red filter\" title=\"SecurityLab bug detector with audio jammer and red lens finder\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetecting range:\u003c\/strong\u003e 50 MHz ~ 6.0 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e L 11.6 × W 7 × T 3.3 cm (without antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 170 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e5 V DC switching power adapter\u003c\/li\u003e\n\u003cli\u003eAAA \/ UM-4 rechargeable battery or dry battery × 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarning mode:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eLED indication\u003c\/li\u003e\n\u003cli\u003eBeep alarm sound\u003c\/li\u003e\n\u003cli\u003eAcoustic display\u003c\/li\u003e\n\u003cli\u003eVibration\u003c\/li\u003e\n\u003cli\u003eEarphone silent detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity Tuner:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust detecting distance to find signal source\u003c\/li\u003e\n\u003cli\u003eEliminate environmental interference\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetecting Distance:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eWireless bug (2 mW): up to 20 ft (beep) \/ up to 15 ft (acoustic)\u003c\/li\u003e\n\u003cli\u003e10 mW 2.4 GHz wireless camera: up to 20 ft\u003c\/li\u003e\n\u003cli\u003e10 mW 5.8 GHz wireless camera: up to 3 ft\u003c\/li\u003e\n\u003cli\u003eGSM cell phone: up to 50 ft\u003c\/li\u003e\n\u003cli\u003eSmartphone: up to 14 ft\u003c\/li\u003e\n\u003cli\u003e5G \/ 4G : up to 25 ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Generator Output:\u003c\/strong\u003e 85dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Strength Indication:\u003c\/strong\u003e 8 LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePackaging Contents\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Detector\u003c\/li\u003e\n\u003cli\u003e1 x User manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat types of devices can the VIM-BUGDETECT09 detect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt can help locate GSM, 4G and 5G bugs, wireless RF microphones, wireless cameras and other spy devices, as well as wired cameras using the lens finder mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat RF frequency range does this detector cover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe detecting range is listed as 50 MHz to 6.0 GHz, covering most common bug, wireless microphone and wireless camera bands described in the specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the noise generator and audio jammer protect conversations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device includes an anti-recording noise generator rated at 85dB and a noise generator audio jammer mode to interfere with nearby voice recorders and listening devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power options are available for the detector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt can run from a 5V DC switching power adapter or from four AAA or UM-4 rechargeable or dry batteries, as outlined in the power specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I pinpoint the exact location of a suspicious signal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can use the sensitivity tuner to adjust detecting distance, reduce environmental interference and move the detector until the warning indicators increase near the signal source.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eBrowse all bug detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\/spy-camera-detectors\" target=\"_blank\"\u003eSee more spy camera detector models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/voice-recorder-jammers\" target=\"_blank\"\u003eExplore voice recorder jammers for audio protection\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eRead the guide to counter surveillance in New Zealand\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507613470802,"sku":"VIM-BUGDETECT09","price":609.09,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/camera-detector-spy-hidden-finder-device-anti-Australia-550x550.jpg?v=1784282100"},{"product_id":"spy-camera-listening-device-detector-gps-finder","title":"Advanced Spy Camera Detector Listening Device GPS Finder","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n  \u003cp\u003eVIM-BUGDETECT07B is a handheld bug detector that pairs a wide-frequency RF scanner with a lens-finder module for wired camera checks. A digital tuner with 8-LED strength display and adjustable sensitivity helps locate suspicious signals quickly, and two alert modes support either audible beeps or vibration for discreet sweeps.\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWide RF coverage:\u003c\/strong\u003e Scans 50 MHz–6.0 GHz to flag common wireless transmitters and hidden cameras.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSignal types detected:\u003c\/strong\u003e Supports detection of GSM, 4G, 5G, Wi-Fi, Bluetooth, analog FM (89–435 MHz), and GPS tracker signals.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e5G band support:\u003c\/strong\u003e Covers 5G frequencies including 3300–3800 MHz.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGPS tracker detection:\u003c\/strong\u003e Helps identify active GPS trackers and location transmitters during vehicle and asset checks.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLens finder:\u003c\/strong\u003e Light-assisted lens detection helps reveal concealed wired pinhole cameras.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClear signal feedback:\u003c\/strong\u003e 8-LED strength bar with smart status indication for fast read-and-react searches.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlexible alerts:\u003c\/strong\u003e Switch between vibration or beep modes to match covert or rapid sweeps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision control:\u003c\/strong\u003e Sensitivity tuner narrows the search window and reduces ambient interference.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eWhere This Works Best\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003eUse for hotel rooms, short-stay rentals, offices, and vehicles when you need a quick sweep for active transmitters or concealed lenses without pairing apps or extra gear.\u003cbr\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/rf-signal-detector-black-unit-with-lens-finder-module.jpg\" alt=\"Black RF signal detector with telescopic antenna, LED strength arc, single-digit display, and separate lens finder module\" title=\"RF signal detector with detachable lens finder and antenna\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch4\u003e\u003cstrong\u003eDetecting Range\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 MHz–6.0 GHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5G band coverage:\u003c\/strong\u003e 3300–3800 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal types detected:\u003c\/strong\u003e GSM, 4G, 5G, Wi-Fi, Bluetooth, analog FM (89–435 MHz), GPS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetection range:\u003c\/strong\u003e Up to 10 m (varies with signal strength and environment)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 11.6 × 7 × 3.3 cm (without antenna)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 170 g (without battery)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e Built-in rechargeable battery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharging interface:\u003c\/strong\u003e USB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarning modes:\u003c\/strong\u003e\n    \u003cul\u003e\n      \u003cli\u003eLED indication\u003c\/li\u003e\n      \u003cli\u003eBeep alarm\u003c\/li\u003e\n      \u003cli\u003eAcoustic display\u003c\/li\u003e\n      \u003cli\u003eVibration\u003c\/li\u003e\n      \u003cli\u003eEarphone silent detection\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity tuner:\u003c\/strong\u003e\n    \u003cul\u003e\n      \u003cli\u003eAdjust detecting distance to find signal source\u003c\/li\u003e\n      \u003cli\u003eEliminate environmental interference\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetecting distance:\u003c\/strong\u003e\n    \u003cul\u003e\n      \u003cli\u003eWireless bug (2 mW): up to 20 ft (beep) \/ 15 ft (acoustic)\u003c\/li\u003e\n      \u003cli\u003e10 mW 2.4 GHz wireless camera: up to 20 ft\u003c\/li\u003e\n      \u003cli\u003e10 mW 5.8 GHz wireless camera: up to 3 ft\u003c\/li\u003e\n      \u003cli\u003eGSM cell phone: up to 50 ft\u003c\/li\u003e\n      \u003cli\u003eSmartphone: up to 14 ft\u003c\/li\u003e\n      \u003cli\u003e5G \/ 4G cell network: up to 25 ft\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n      \u003c\/ul\u003e\n    \n  \n\n  \u003ch2\u003e\u003cstrong\u003ePackaging Contents\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 × Detector\u003c\/li\u003e\n    \u003cli\u003e1 × User manual\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eWhat does the sensitivity tuner do?\u003c\/strong\u003e\u003cbr\u003eIt reduces the scan window so you can pinpoint the source after an initial room sweep and minimise false positives.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eCan I run a silent sweep?\u003c\/strong\u003e\u003cbr\u003eYes. Choose vibration alerts with earphones for quiet checks in hotels or shared spaces.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eDoes it require an app or internet?\u003c\/strong\u003e\u003cbr\u003eNo. Operation is fully local via the panel controls and indicators.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eWill it detect wired cameras?\u003c\/strong\u003e\u003cbr\u003eThe lens-finder module helps spot the reflective lens on concealed wired pinhole cameras.\u003c\/p\u003e\n\n  \u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\n  \u003chr\u003e\n  \u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eBrowse bug detectors\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eRead a Buying Guide on Counter-surveillance tools\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-hidden-cameras\" target=\"_blank\"\u003eHidden cameras overview\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507627200594,"sku":"VIM-BUGDETECT07B","price":527.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/professional-bug-sweeper-spy-phone-camera-gps-listening-device-counter-surveillance-550x550_1b10e8f8-a5c1-4354-8c89-98feca0b14d6.jpg?v=1784282137"},{"product_id":"spy-phone-bugs-detector-hidden-finder-protect-1205m","title":"Protect 1205M Spy Phone Finder Hidden Bugs Detector","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eThe Protect 1205M counter-surveillance device is a handheld RF bug detector designed to locate wireless transmitters, spy phones, GPS bugs and hidden cameras across a 50-6000 MHz range. This pen-style scanner uses a 16 segment bar graph, adjustable sensitivity and vibrating alerts to help you trace suspicious signals around vehicles, offices and meeting rooms. Powered by a single AA battery and built for professional sweeps, Protect 1205M gives you a quick way to check your environment for active radio based surveillance devices.\u003c\/p\u003e\n\u003cp\u003eCompact and discreet, the Protect 1205M is suitable for people who need to verify that their conversations, movements and workspaces are not being monitored, without drawing attention while they perform a sweep.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide RF coverage:\u003c\/strong\u003e Scans a wide frequency range so you can search for bugs operating between 50 MHz and 6 GHz in homes, offices or vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast multi type bug detection:\u003c\/strong\u003e Detects a range of RF threats including VHF and UHF transmitters, GSM bugs, wireless video cameras, Wi Fi audio and video transmitters, vehicle transmitters and body carried transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable sensitivity and bar graph:\u003c\/strong\u003e A 16 segment bar graph indicator and sensitivity control help you see signal strength, adjust for background noise and move toward the source of a bugging device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple alert modes:\u003c\/strong\u003e Normal, vibrating and audio modes with low power indication let you choose between regular sweeps and silent vibration when you need discreet feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable single battery design:\u003c\/strong\u003e Runs from a single AA battery with battery life rated up to 20 hours, making the detector easy to carry for travel or regular counter surveillance checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhere This Detector Is Used\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Protect 1205M suits users who need to check offices, meeting rooms, private homes, vehicles and travel bags for active RF surveillance devices. Use it to scan desks, walls, ceilings, vehicles and personal belongings, watching the bar graph and alerts as you move so you can narrow down the position of transmitters, wireless cameras and spy phones before they compromise confidential discussions.\u003cbr\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/protect-1205m-rf-bug-detector-black-pen-style.jpg\" alt=\"Slim black Protect 1205M RF bug detector on a white background, showing the side control panel and model label on the housing.\" title=\"Protect 1205M RF bug detector in slim pen-style housing\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range\u003c\/strong\u003e: 50MHz - 6GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls\u003c\/strong\u003e: Power button, Mode button, ATT button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators\u003c\/strong\u003e: 1) 16-segment bargraph; 2) Vibration 3) Battery state (3 colors 4) Working mode 5) ATT state\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery resource\u003c\/strong\u003e: 10-20 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 172 x 19 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range\u003c\/strong\u003e: 100 mA in standby mode 200 mA at a full bar graph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower source\u003c\/strong\u003e: 1 x AA battery (LR06)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat types of devices can the Protect 1205M detect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed to help locate a variety of RF transmitters including wireless bugs, spy phones, GPS bugs, vehicle transmitters, wireless video cameras and Wi Fi audio or video transmitters operating within its frequency range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I use the bar graph and sensitivity control during a sweep?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStart with lower sensitivity to avoid overload, then move around the area and watch the 16 segment bar graph. As the bar graph rises, reduce sensitivity and move toward the strongest indication to narrow down the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat alert modes are available on this detector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit supports normal audio indication, a vibrating mode for discreet feedback and an audio mode, with low power indication provided so you know when the battery is nearly exhausted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does the battery last in typical use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe listed battery resource is 10 to 20 hours from a single AA battery, depending on how intensively the detector is used and how often the bar graph is driven to high levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Protect 1205M suitable for travel and field work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Its compact pen style dimensions and single AA power source make it easy to pack in a bag or pocket so you can perform counter surveillance checks in vehicles, hotel rooms or temporary offices.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eBrowse all bug detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\/spy-camera-detectors\" target=\"_blank\"\u003eSee more spy camera detector models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\"\u003eRead the guide to Counter-Surveillance in New Zealand\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Protect","offers":[{"title":"Default Title","offer_id":42507628019794,"sku":"Protect 1205 NEW","price":453.64,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/Protect-1205-spy-bugs-device-GPS-finder-counter-surveillance-550x550_e4f01db1-4554-43a2-b668-8ca3c17fa437.jpg?v=1784282142"},{"product_id":"spy-phone-detector-bugs-gps-listening-device","title":"Spy Phone Detector for GPS Listening","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eThe VIM-BUGDETECT07 is a wideband camera and listening device detector designed to protect conversations and spaces from hidden surveillance. It combines RF bug detection across 50 MHz to 6.0 GHz with an optical lens finder that reveals reflections from concealed camera lenses, helping you track wireless bugs, wireless cameras and suspicious mobile phone activity in rooms, vehicles and meeting spaces.\u003c\/p\u003e\n\u003cp\u003eThe detector uses adjustable sensitivity, multiple warning modes and an acoustic display so you can move from quick room scans to precise location while keeping alerts as quiet or as obvious as the situation requires.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical lens finder:\u003c\/strong\u003e A built-in light source and viewing window make hidden camera lenses reflect back toward you so you can see where they are positioned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband RF coverage:\u003c\/strong\u003e Detects wireless bugs, wireless cameras and mobile phones across a 50 MHz to 6.0 GHz range for broad counter-surveillance sweeps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible warning modes:\u003c\/strong\u003e LED indication, beep alarm sound, acoustic display, vibration and earphone silent detection let you adapt alerts to each environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable sensitivity:\u003c\/strong\u003e A sensitivity tuner lets you set detection distance, reduce environmental interference and home in on the strongest signal source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined detection distances:\u003c\/strong\u003e Specified ranges for low power wireless bugs, 2.4 GHz and 5.8 GHz cameras and phones give clear expectations for coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterintelligence sweeps:\u003c\/strong\u003e Detects wireless wiretaps across cars, offices, conference rooms, dressing rooms, bathrooms, hotels, recreational grounds and secure facilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic assessment:\u003c\/strong\u003e Checks existing electromagnetic signals in workplaces and accommodation to confirm that environments remain secure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppliance safety checks:\u003c\/strong\u003e Supports checking appliances such as microwave ovens for ageing or leakage issues during broader security audits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrivacy and trade secret protection:\u003c\/strong\u003e Helps uphold personal privacy, confidentiality and trade secrets by countering covert photography and eavesdropping attempts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTypical Sweep Scenarios\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the VIM-BUGDETECT07 to check cars, offices, conference rooms, dressing rooms, bathrooms, hotels, recreational grounds and other work or accommodation areas for wireless wiretaps, covert cameras and unwanted phone transmissions before family trips or confidential business meetings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%;\" src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/multi-use-rf-bug-detector-black-kit-lens-module.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetecting range\u003c\/strong\u003e: 50 MHz ~ 6.0 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension\u003c\/strong\u003e: L 11.6 x W 7 x T 3.3 cm (not include antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: About 170g (not including battery)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: 1. 5V DC switching power adaptor; 2. AAA \/ UM-4 rechargeable battery or dry battery x 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarning mode\u003c\/strong\u003e: 1. LED indication 2. Beep alarm sound 3. Acoustic display 4. Vibration 5. Earphone silent detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity Tuner\u003c\/strong\u003e: 1. Adjust detecting distance to find signal source 2. Eliminate the environment interference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetecting Distance\u003c\/strong\u003e: Wireless bug (2mW) up to 25 feet (beep), up to 15 feet (acoustic); 10mW 2.4GHz wireless camera up to 15 feet; 10mW 5.8GHz wireless camera up to 4 feet; GSM cell phone up to 50 feet; smartphone up to 13 feet; 4G 2100 cell network: up to 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumer behaviour analysis\u003c\/strong\u003e: Supports monitoring and analysis of behaviour patterns in shopping mall environments as part of wider security work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003ePackaging Contents\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Detector\u003c\/li\u003e\n\u003cli\u003e1 x User manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat types of devices can the VIM-BUGDETECT07 detect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed to detect wireless bugs, 2.4 GHz and 5.8 GHz wireless cameras, GSM cell phones and smartphones within the specified detection distances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the lens finder help locate hidden cameras?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe built in light source shines onto camera glass, and the reflected beam appears in the viewing window so hidden lenses stand out as bright points when you scan surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far away can it detect wireless cameras and bugs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTypical detection distances are up to 25 feet for low power wireless bugs, around 15 feet for 2.4 GHz cameras and about 4 feet for 5.8 GHz cameras, depending on installation and environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power options are available for this detector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can run the unit from a 5V DC switching adaptor or from four AAA (UM-4) rechargeable or dry batteries for portable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I use the sensitivity tuner during a sweep?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBegin with lower sensitivity for broad scans, then increase sensitivity as signal strength rises so you can separate real threats from background interference and pinpoint the source.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eExplore the full Bug Detector range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eBrowse Spy Camera detector options\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003eLearn about Counter-Surveillance through our Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507628380242,"sku":"VIM-BUGDETECT07","price":490.91,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/camera-detector-spy-hidden-finder-locator-anti-Sydney-550x550_da501279-0297-4b35-9c54-b7b9bb571cc7.jpg?v=1784282144"},{"product_id":"protect-1206i-spy-listening-bugs-cams-detector","title":"Protect 1206i Hidden Cameras Detector Listening bugs finder","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003ehttps:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\u003c\/a\u003eThe Protect 1207i counter-surveillance detector is a professional handheld RF scanner designed to locate hidden wireless devices across modern communication bands. Six independent detection channels cover GSM, CDMA, 4G and 5G transmitters as well as Bluetooth, Wi-Fi and Wi-Max sources, while dual omni-directional antennas and a metallic enclosure support reliable sweeps in offices, homes and vehicles.\u003c\/p\u003e\n\u003cp\u003eMicroprocessor control, two sensitivity ranges with an attenuator, and six ten-segment signal-strength bargraph indicators help you quickly narrow down suspicious signals and distinguish everyday RF activity from potential bugs, GPS trackers or spy phones.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-band RF detection:\u003c\/strong\u003e Six detection channels scan GSM, CDMA, 4G and 5G cellular signals alongside Bluetooth, Wi-Fi and Wi-Max, so a single detector can cover most modern wireless surveillance devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined band coverage:\u003c\/strong\u003e Dedicated channels target CDMA 850, GSM 900\/1800\/1900, 5G\/4G\/LTE\/DECT, Wi-Fi\/Bluetooth and Wi-Max signals for structured sweeps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive device coverage:\u003c\/strong\u003e Tracks activity from GSM baby monitors, GSM alarms, GSM bugs, GSM spy phones, GPS trackers, Bluetooth bugging devices, spy phones with Bluetooth or Wi-Fi functions, Wi-Fi bugging devices and Wi-Max bugging devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable sensitivity and attenuator:\u003c\/strong\u003e Two sensitivity levels and a built-in attenuator widen the dynamic range, making it easier to move from wide-area sweeps to close-in pinpointing without overloading the indicators.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible monitoring modes:\u003c\/strong\u003e Silent, vibration, visual and listening modes, plus a setup mode and an extra display that shows probable protocols, let you match alerts and feedback to each sweep environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-ready build and display:\u003c\/strong\u003e A durable metallic body, dual omni-directional antennas and six ten-segment bargraph indicators provide robust handling and clear visual feedback during regular counter-surveillance work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTypical Sweep Environments\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the Protect 1207i when you need to audit rooms, meeting spaces, rental properties or vehicles for hidden transmitters before confidential discussions or high-risk activity. Its multi-band coverage and bargraph guidance make it suitable for checking for GSM spy phones, GPS trackers, Bluetooth and Wi-Fi bugging devices, and other wireless bugs in offices, homes, hotel rooms and transport.\u003cbr\u003e\u003cimg src=\"https:\/\/www.securitylab.com.au\/image\/catalog\/2025\/Product%20Desc%20Images\/Counter%20Surveillance\/protect-1207i-wireless-bug-detector-front-panel.jpg\" alt=\"Protect 1207i handheld wireless detector upright with two coloured antennas, labelled front controls\" title=\"Protect 1207i detector front view with dual antennas\" style=\"width: 100%;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range\u003c\/strong\u003e: 50 MHz - 6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection bands\u003c\/strong\u003e: CDMA 824–849 MHz; GSM 880–920 MHz; GSM DCS 1710–1790 MHz; 5G\/4G\/LTE\/DECT 1920–2600 MHz; Wi-Fi\/Bluetooth 2400–2480 MHz; Wi-Max 3000–7000 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls\u003c\/strong\u003e: Power button, Mode button, ATT button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators\u003c\/strong\u003e: 1) 16-segment bargraph; 2) Vibration; 3) Battery state (3 colors); 4) Working mode; 5) ATT state\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery resource\u003c\/strong\u003e: 10-20 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (without antennas)\u003c\/strong\u003e: 120 x 70 x 16 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 217 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent consumption\u003c\/strong\u003e: 100 mA in standby mode, 200 mA at a full bar graph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower source\u003c\/strong\u003e: 2 x AAA batteries (LR03)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro-pointer antenna frequency range\u003c\/strong\u003e: 2-12 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna type\u003c\/strong\u003e: Log-periodic array\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro-pointer antenna model name\u003c\/strong\u003e: LPDA-12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro-pointer antenna dimensions\u003c\/strong\u003e: 53 x 84 x 9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector\u003c\/strong\u003e: SMA Male\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003ePackaging Contents\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x User manual\u003c\/li\u003e\n\u003cli\u003e1 x Detector\u003c\/li\u003e\n\u003cli\u003e2 x battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the Protect 1207i find hidden devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe detector scans multiple RF bands, including GSM, CDMA, 4G, 5G, Bluetooth, Wi-Fi and Wi-Max. Six bargraph indicators and protocol mapping help you see when suspicious transmissions are present and which band they are using.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this detector locate GPS trackers in vehicles?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Protect 1207i can detect RF activity from GPS trackers that use GSM or other supported wireless protocols, helping you locate tracker transmitters within the stated detection distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the typical detection range during a sweep?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specified detection distance is approximately 1 to 10 meters. In practice, you can start with wider sweeps then close in using the attenuator and sensitivity controls as the bargraph levels rise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power source does the unit use and how long does it run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device is powered by 2 AAA (LR03) batteries, with a stated operation time of about 10 to 15 hours depending on usage and battery quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it show which type of signal is being detected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The extra data display and dedicated bargraph channels indicate the probable protocol, so you can see whether the signal is consistent with cellular, Wi-Fi, Bluetooth or other supported sources.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eLegal Disclaimer\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRecording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eLearn More\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/bug-detectors\" target=\"_blank\"\u003eSee all counter-surveillance detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/spy-camera-detectors\" target=\"_blank\"\u003eBrowse dedicated spy camera detectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.securitylab.com.au\/home-house-sweep-spy-bugs-counter-surveillance-service\"\u003eLearn about Counter-Surveillance Products through our Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Protect","offers":[{"title":"Default Title","offer_id":42507629985874,"sku":"Protect-1206i","price":763.64,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/protect-1206i-ant-spy-detetect-counter-surveillance-550x550.jpg?v=1784282151"},{"product_id":"spy-mobile-cell-phones-detector-hidden-spy-gsm-bugs-finder","title":"Hidden Cameras Detector Anti Spy Phone Finder New Zealand","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eThe 007PLUS is a handheld bug sweeper that detects wireless signals across 20–5000 MHz and highlights activity using a 10-level LED indicator. It offers six working modes—sound, vibration, acoustic, guard, silent, and standard—plus a headphone port for discreet checks. A compact, lightweight body and up to 10 m working range make it suitable for quick privacy sweeps in homes or travel.\u003ca href=\"https:\/\/www.securitylab.com.au\/securitylab-blog\/counter-surveillance-new%20zealand\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507634999378,"sku":"007PLUS","price":271.82,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/spy-cameras-detector-finder-listening-devices-counter-surveillance-550x550.jpg?v=1784282174"},{"product_id":"wireless-spy-camera-detector-scanner-hidden","title":"iProtect 1216 5G Spy Camera \u0026 Wireless Bug Detector","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eThe Protect-1216i is a professional RF bug detector that scans from 50 MHz to 12 GHz across three segmented bands with dedicated microwave coverage from 3–12 GHz. It uses dual antennas for the lower bands and a built-in microwave antenna for the highest band, with two OLED displays that show bar graphs, histograms, and signal signatures to help identify sources such as Wi-Fi, Bluetooth, GSM, 4G, 5G, DECT, and other RF transmitters.\u003c\/p\u003e\n\u003cp\u003eWorking modes include SILENT, AUDIO, and ALARM with adjustable thresholds to suppress background interference. A rechargeable Li-Ion battery provides up to 6 hours of operation with 4 hours to recharge via USB, and a power saver mode extends runtime when needed.\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Protect","offers":[{"title":"Default Title","offer_id":42507635327058,"sku":"Protect 1216i","price":1150.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/Protect-1216i-_20anti-spy-3-band-connection-bluetooth-internet-shock-resistent-aus-camera-surveillance-iprotect-protect-wifi-4G-5G-internet-listening-evesdrop-best-deal-550x550_2c4cc1dd-20fd-4616-a2a9-e121ca0c7452.jpg?v=1784282175"},{"product_id":"protect-1207i-spy-camera-detector-gsm-phone-bugs-finder","title":"Protect 1207i 5G Spy Camera Detector \u0026 GSM Bug Finder","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eThe Protect 1207i counter-surveillance detector is a professional handheld RF scanner designed to locate hidden wireless devices across modern communication bands. Six independent detection channels cover GSM, CDMA, 4G and 5G transmitters as well as Bluetooth, Wi-Fi and Wi-Max sources, while dual omni-directional antennas and a metallic enclosure support reliable sweeps in offices, homes and vehicles.\u003c\/p\u003e\n\u003cp\u003eMicroprocessor control, two sensitivity ranges with an attenuator, and six ten-segment signal-strength bargraph indicators help you quickly narrow down suspicious signals and distinguish everyday RF activity from potential bugs, GPS trackers or spy phones.\u003ca href=\"https:\/\/www.securitylab.com.au\/counter-surveillance-buying-guide\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Protect","offers":[{"title":"Default Title","offer_id":42507635818578,"sku":"Protect-1207i","price":986.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/Protect-1207i-detector-of-spy-cameras-550x550.jpg?v=1784282179"},{"product_id":"wega-i-pinhole-camera-finder-spy-cameras-detector","title":"Travel Hidden Camera Detector | WEGA-i 10m Lens Scan","description":"\u003cp\u003eRF detection catches cameras that transmit a wireless signal. Wired cameras, battery-powered recorders, and powered-down devices stay invisible to signal-based sweeps entirely. The WEGA-i works on a different principle – infrared light reflects off the physical lens, revealing every camera regardless of type or power state. Built-in IR-filtering glass rejects reflections from mirrors and polished surfaces, confirming each detection before you investigate.\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Protect","offers":[{"title":"Default Title","offer_id":42507636998226,"sku":"WEGAI","price":518.18,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/WEGA-i-Pinhole-Camera-Finder-550x550.jpg?v=1784282186"},{"product_id":"hawksweep-007-pro-spy-cameras-detector-hidden-bugs-finder","title":"3-in-1 Portable Bug Sweeper with Infrared Camera \u0026 GPS Tracker Detection for Privacy Protection","description":"\u003cdiv style=\"font-family: Verdana, sans-serif; font-size: 14px;\"\u003e\n\u003cp\u003eVIM-BUGDETECT13 is a handheld 3-in-1 bug detector that combines wide-band RF scanning, a magnetic-field probe for GPS beacons, and 940 nm infrared lens detection. A multicolour needle meter and single sensitivity dial simplify operation, while onboard processing avoids cloud or app dependencies. The ABS housing weighs 160 g, runs from a 500 mAh Li-ion pack for about 5 h, and recharges via USB-C in under 4 h. Typical detection ranges include RF coverage from 10 MHz to 8.6 GHz, an IR lens check up to 3 m, and magnet-probe alerts within 20 cm. Dimensions are 117 × 60.5 × 24 mm for pocket-ready carry.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"OEM","offers":[{"title":"Default Title","offer_id":42507637227602,"sku":"VIM-BUGDETECT13","price":271.82,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/files\/ai-detector-wireless-bug-gps-tracker-ir-camera-finder-550x550_4d31012b-dc44-4fdc-89be-4aa6bfb8451b.jpg?v=1784282187"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0599\/4636\/9106\/collections\/counter2.png?v=1787046476","url":"https:\/\/securitylab.co.nz\/collections\/spy-camera-detectors.oembed","provider":"Securitylab NZ","version":"1.0","type":"link"}