The D-LENP 4G Signal Booster model A27021 is designed to improve cellular reception for trail cameras and other outdoor monitoring devices that rely on 4G connectivity. This panel antenna booster covers 698–960 MHz and 1710–2700 MHz bands, delivers 10–12dBi gain with a VSWR of less than 2.5, and uses an SMA connection with a 5m cable to help cameras maintain a stable link in weak signal areas.
Built for permanent outdoor use, the booster pairs its wide 4G frequency coverage with a weather-resistant white housing that blends easily into most installations. It can be mounted on posts, trees or building structures and connected via SMA to compatible trail cameras or other cellular hardware, providing more reliable transmission where coverage is marginal.
Key Features & Benefits
-
Wide 4G frequency support: Covers 698–960 MHz and 1710–2700 MHz bands so compatible trail cameras can maintain data links across common 4G networks.
-
High-gain signal boost: Panel antenna design with 10–12dBi gain and VSWR less than 2.5 strengthens weak signals to improve stability and transmission quality.
-
Flexible 5m installation cable: Included 5m lead allows the antenna to be positioned higher or clearer than the camera for better line-of-sight reception.
-
Outdoor-ready construction: Rugged, weather-resistant housing is suitable for long-term use in exposed environments including rain, wind and temperature changes.
-
SMA connector and adapter: SMA male connector with supplied SMA male-to-female converter makes it easier to match the booster to different trail camera and modem inputs.
How This Booster Is Used Outdoors
This 4G signal booster is intended for trail cameras and remote monitoring systems that struggle with marginal mobile coverage around farms, bush tracks, access roads or remote research sites. Mounting the panel in a clear, elevated position and running the 5m cable back to the camera helps pull in stronger 4G signals so images and alerts can be sent more reliably from difficult locations.
Technical Specifications
-
Cable Length: 5m
-
Colour: White
-
Connector Type: SMA male
-
VSWR: <2.5
-
Gain: 10–12dBi
-
Impedance: 50 Ohms
-
Frequency Range: 698–960 MHz, 1710–2700 MHz (4G)
-
Antenna Type: 4G panel antenna
-
Model Number: A27021
-
Brand Name: D-LENP
-
Converter: SMA male to female adapter included
Packaging Contents
- Booster
- SMA converter
- metal mount with screws
Frequently Asked Questions (FAQ)
Is this booster compatible with my 4G trail camera?
The booster is suitable for trail cameras and other devices that use 4G bands within 698–960 MHz and 1710–2700 MHz and have an SMA antenna connection or compatible adapter.
How should I position the antenna for best performance?
Mount the panel as high and clear as practical, pointing toward the nearest 4G tower or open horizon, and avoid obstructions such as thick trees, metal roofs or rock faces between the booster and the network.
Can this booster create coverage where there is no 4G signal at all?
No. It improves reception in weak-signal areas but cannot provide connectivity in locations with no 4G service. A minimal existing signal is required for it to amplify.
Is the booster suitable for permanent outdoor installation?
Yes. It is designed for outdoor use and built from materials intended to withstand rain, wind and temperature changes when mounted securely.
Do I need any special tools to install it?
Basic hand tools are usually enough to fix the metal mount and route the 5m cable. The SMA connector simply screws onto a matching antenna port on the camera or modem.
Legal Disclaimer
Recording and surveillance laws vary by state and territory. Please check your local requirements, obtain consent where necessary, and use this device only for lawful purposes. This information does not constitute legal advice.
Learn More
