You're riding. A car cuts you off. Brakes screech. Words are exchanged. Who's at fault?
This dual-channel camera records both front and rear in 720P HD—so you have the full story. The parking mode catches vandals and hit-and-runs even when the bike's off.
Key Features
-
See Both Front and Rear in HD - Dual 720P cameras record simultaneously at 30FPS
-
Always-On Security When Parked - Parking mode activates on motion or impact, powered by hardwired kit
-
Don't Miss a Corner - 120° wide-angle lenses capture your entire lane and blind spots
-
Evidence Locks Automatically - G-sensor detects collisions and saves footage before loop recording overwrites it
-
Ride Through Rain or Shine - IP67 waterproof cameras and cables built for all weather
-
Install Anywhere in Minutes - 3M adhesive mounts and cable ties included—no drilling needed
How It Works
The main unit mounts discreetly on your bike. Two waterproof cameras connect via 3-meter cables (front and rear). Hardwire the kit to your bike's battery for permanent power—camera turns on and off with the ignition. Footage records to a microSD card (up to 32GB, not included) in a continuous loop. If the G-sensor detects a bump or impact, that clip locks to prevent overwriting.
Daily Commuter Protection
Rush hour traffic is unpredictable. A driver changes lanes without seeing you.
Front and rear cameras capture the entire sequence in HD. The 120° lens shows your position, their indicator, and the lane markings. If they claim you were in their blind spot, you have proof.
Parked Bike Security
Your bike is parked on the street overnight. Someone backs into it and drives off.
Parking mode uses minimal power from the hardwired battery. Motion or an impact triggers recording. You get clear footage of the vehicle and plate before they leave.
Technical Specifications
-
Model: VIM-DUALMX
-
Channels: Dual (Front + Rear)
-
Resolution: 1280x720P (720P HD) per channel
-
Frame Rate: 30 FPS per channel
-
Lens Angle: 120° wide-angle (per camera)
-
Display: 2.0" TFT LCD screen
-
Storage: MicroSD card up to 32GB (Class 10 recommended, not included)
-
G-Sensor: 3-axis impact detection (locks event footage)
-
Recording Mode: Continuous loop (1/3/5 minute segments)
-
Power: Hardwired kit (connects to vehicle battery)
-
Camera Cable Length: 3 meters (front and rear)
-
Weather Resistance: IP67 waterproof (cameras and cables)
-
Mounting: 3M adhesive pads, plastic straps, rubber holder included
Lawful Use
Legal for use on vehicles you own or with the owner's consent. Recording in private spaces where there is an expectation of privacy (e.g., inside a home) may be restricted. User is responsible for complying with local audio/video recording laws.
What's in the Box
- 1x Main Recording Unit
- 2x Waterproof Cameras (Front & Rear)
- 1x Hardwired Power Kit
- 2x 3-meter Camera Cables
- 3x 3M Adhesive Mounts
- 1x Set of Plastic Straps & Rubber Holder
- 1x Quick Start Guide
Not included: MicroSD card (up to 32GB Class 10 required for recording)
FAQ
1. Does this record while the bike is parked?
Yes. When hardwired, the parking mode stays active. It will start recording if motion is detected near the bike or if an impact occurs.
2. How long does the footage last?
With a 32GB card, you get approximately 8 hours of dual-channel recording. The camera loops, overwriting the oldest files. Important clips (from G-sensor events) are locked and saved separately.
3. Is it difficult to install?
No. The 3M mounts stick anywhere. Use the included straps for a secure fit. The hardwired kit connects to your battery (basic tools required). No permanent modification needed.
4. Will it drain my motorcycle battery?
The parking mode uses very low power. For long-term parking (weeks), we recommend using a battery monitor or disconnecting the kit.
5. Are the cameras really waterproof?
Yes. Both cameras and cables are IP67 rated. They can handle heavy rain, road spray, and bike washes.
Learn More
